"Mold is the mother of industry" this sentence we have been familiar with, the importance of mold is increasingly recognized by people, mold design and mold manufacturing technology has made great progress.
With the expansion of the mold industry, contact with the mold more and more people, some hope to buy the mold, the use of mold people do not know the knowledge of the mold, afraid of being cheap manufacturers.
Mould assist system
Transport plate: a small plate that is connected to the male and female molds in the process of mold transportation and hoisting, so that the male and female molds are not separated.
Nameplate: identify mold ownership, mold forming parts, mold manufacturing time, mold factory information, etc.
Die hole: The screw hole which is machined on the formwork because it needs lifting equipment to lift the die when setting the die.Each template must have a lifting hole.
Pry die pit: generally in the four corners of the template break, mainly for the convenience of mold disassembly, especially the public template must have, because the mold from the forming machine down, cavity pressure will be less than the external atmospheric pressure, plus plastic bond, the mold must be pry open
Dust baffle: the movement of the ejector plate requires a certain amount of space. This part of the mold is open, so it is easy to fall into other things, such as spanner, material and other things. The processing mold is stuck.At this time in the mold on the surface of the installation of a board to keep out, is the dust plate.
Counter: shows how many times the die has been opened and closed
Micro switch: confirm that the ejector plate returns to position after confirming the die opening.Can also be used in hydraulic cylinder travel switch.